SOME OF THE PROGRAMMABLE FEATURES OF THE MSS-200 INCLUDE:
· Preheat duration
  · Number of restart attempts
· Pause between repeated starts
  · Over-crank starter motor deactivation in seconds
  ·

Generator load switch activation

· Engine cool-down and warm-up cycle

· Security pass-code
· Start motor disengagement by frequency
   
 
 

DOWNLOAD MSS-200 SPEC SHEET PDF

DOWNLOAD MSS-200
INSTRUCTION MANUAL




 

DESCRIPTION

The versatile MSS-200 is an incredibly compact automatic engine start/stop controller, used primarily on stationary equipment. The highly flexible MSS-200 is fully programmable. Its 17 parameters are preprogrammed at the factory to the most commonly used parameters. However, changing the factory preset is easily accomplished by using a simple push-button binary code sequence using three buttons on the front of the unit. To protect against unauthorized changes, stored values can be pass-code protected.

When used in combination with ground contact switches, the MSS-200 can also shutdown the engine due to a failure, i.e., oil pressure, temperature, alternator charge, v-belt or any other customer-defined parameter.

Applications requiring shutdown indication can use the MSS-200 in combination with the MC6K or MC536 shutdown systems, which informs the operator the cause of failure. The MSS-200 can also be easily integrated into one of LOFA’s Aluflex™ aluminum enclosure panels.

FEATURES AND ADVANTAGES

  • Automatic engine start/stop Fits industry standard 2-1/16" panel openings for compatibility with almost any existing instrument panel
  • Durable IP 63 spray-resistant housing
  • 12 and 24 volt operation
  • Operating temperature: -22° F to 185° F
  • Designed for use in combination with widely available common ground contact switches
  • Built-in audible alarm/beacon light output for extra shutdown indication
  • Programmable by use of simple push-button binary code sequence
  • 17 Parameters can be reprogrammed to meet each application's specific requirement
  • Programmable automatic preheat with afterglow
  • 2A maximum amperage capacity
  • Optional relay interface converts the MSS-200's 2A output to 30A while simplifying installation
  • Standby amperage draw:
   - Zero mA in (+) control mode
   - 40 ma in (–) control mode
  • Fuel savings/maintenance cost savings. The ability to automatically start and stop an engine on demand has already saved many of our customers thousands of dollars in fuel and maintenance costs.
  • Flasher/audible alarm output
  • Installation/programming instructions provided with each unit
  • 2-year limited warranty